Raing 额定:  

12A 250VAC（CQC、CB）

16A 125/250VAC（CQC、CB） 

ELECTRICAL(电气特性):  

(接触电阻)INITIAL CONTACT RESISTANCE:30mΩ Max. 

(操作力量)OPERATION FORCE:500±200gf 

(绝缘电阻)INSULATION RESISTANCE:100MΩ Min. 500VDC 

(电气寿命)ENDURANCE:10,000 CYCLES 

(耐 电  压)WITHSTAND VOLTAGE:1 KVAC FOR 1MINUTE MATERIAL  

(材      质)TERMINAL BASE:PHENOLIC LAMINATE(94V-0) 

              ACTUATOR:PBT+30%G.F.( 94V-0) 

              CONTACT:Ag AlloySPRING BLADE:STAINLESS STEEL 

规格详细说明： 

1.APPLICATION TEMPERATURE RANGE (适用温度范围): -10-125°C 

2.TEST CONDITION  (测试环境):THE SWITCH IS TESTED AT A TEMPERATURE RANGE OF 5-35°C AND RELATIVE HUMIDITY RANGE OF 45-85%.           

     * 环境温度范围 : 5-35℃                                                                                   * 相对湿度范围 : 45-85% 

3.  RATING (额定):16A 125VAC / 12A 250VAC 

4.  ELECTRONICAL PERFORMANCE (电气性能):                                                     

    4-1.CONTACT RESISTANCE (接触电阻):MEASURED BY FALL-OF-POTENTIAL METHOD AT DC 0.2V/1A SHOULD BE LESS THAN 50m? INITIAL.  

       * 以微电阻计在DC 0.2V/1A的测试规格值下, 接触电阻值应该小于50mΩ.         

    4-2. INSULATION RESISTANCE (绝缘电阻):MEASURED WITH DC 500V APPLIED BETWEEN TERMINALS OF OPEN CONTACTS AND BETWEEN TERMINAL OF OPPOSITE POLARITY OR METAL PART. SHOULD BE MORE THAN 100M?.

       * 绝缘电阻计于DC 500V设定值下量测于开路的端子或不同回路的端子, 其绝缘电阻值应该大于100MΩ.                 

    4-3. DIELECTRIC STRENGTH (耐电压):THE SWITCH SHALL WITHSTAND WITHOUT BREAKDOWN A POTENTIAL OF AC 1500V 0.5mA FOR MINUTE BETWEEN TERMINALS OF OPEN CONTACTS AND  TERMINALS OF OPPOSITE POLARITY OR METAL PART.

       * 不同极的两支端子开路时, 必须通过一分钟1500VAC 0.5mA的耐电压.

       * 端子与外壳, 必须通过一分钟1500VAC 0.5mA的耐电压.